VC Prop-O-Drev Primer primer transmisii,elici,trimtab

APPLICATION AND USE
Preparation Prime bare metal and factory enamelled surfaces with 2 coats of VC Prop-O-Drev Primer. This
is essential on aluminium and alloy as Trilux Prop-O-Drev is NOT suitable for direct application.
For best results on previously antifouled surfaces, remove existing paintwork. Alternatively,
abrade with wet 240 grade paper.
Method Spray sparingly 10-15 cm (4-10") from the surface. Apply a minimum of 3 coats, allowing 30
mins between coats.
Hints Mixing Shake can thoroughly.
Thinner YTA600 VC General Thinner.
Cleaner YTA600 VC General Thinner.
Other Take care to apply all the paint calculated even if it means applying an extra coat. It is
important for performance to apply the correct thickness.
Some Important Points To prevent premature failure, ensure the correct amount of paint is applied using the coverage
as a guide. Product temperature should be minimum 0°C and maximum 35°C. Ambient
temperature should be minimum 0°C/32°F and maximum 35°C/95°F. Substrate temperature
should be minimum 1°C above dew point and maximum 35°C.
Compatibility/Substrates Suitable for use on all substrates including suitably primed Aluminium/Alloy and Zinc-sprayed
metals. Also suitable for factory enamelled finishes.
Number of Coats 3 minimum
Coverage (Theoretical) - Approx. 1 can per medium-sized outdrive.